Reflash v0.1.2 - Revision history

Elias: Elias moved page Reflash to Reflash v0.1.2: New major revision

2024-05-14T09:10:17Z

Elias moved page Reflash to Reflash v0.1.2: New major revision

← Older revision	Revision as of 09:10, 14 May 2024
(No difference)

Elias at 18:48, 13 May 2024

2024-05-13T18:48:22Z

← Older revision		Revision as of 18:48, 13 May 2024
Line 42:		Line 42:
	===='''Note'''====		===='''Note'''====
	It is possible to log in to the Reflash image for manual operations. The SSH access is available using username '''root''' and password '''temppwd'''		It is possible to log in to the Reflash image for manual operations. The SSH access is available using username '''root''' and password '''temppwd'''
			</div>

			<div class="alert alert-warning">
			===='''Note'''====
			Sometimes the flashing does not work as expected. It's not clear why this happens at this time, but running through the procedure of flashing Reflash to the USB drive again from scratch seems to resolve the issue.
	</div>		</div>

Elias at 14:35, 23 March 2024

2024-03-23T14:35:48Z

← Older revision		Revision as of 14:35, 23 March 2024
Line 5:		Line 5:
	Reflash is a Linux image for downloading and installing [[Refactor]] images on [[Recore]]. You can also create an image from the contents of the eMMC.		Reflash is a Linux image for downloading and installing [[Refactor]] images on [[Recore]]. You can also create an image from the contents of the eMMC.

	This page is for Reflash v0.1.2 which is the latest stable version of Reflash.		This page is for Reflash v0.1.2 which is the latest '''stable''' version of Reflash.
	If you want to try the next version, take a look at <br>		If you want to try the next version, take a look at <br>
	[[Reflash_1.0.0]]		[[Reflash_1.0.0]]

Elias at 14:35, 23 March 2024

2024-03-23T14:35:09Z

← Older revision		Revision as of 14:35, 23 March 2024
Line 6:		Line 6:

	This page is for Reflash v0.1.2 which is the latest stable version of Reflash.		This page is for Reflash v0.1.2 which is the latest stable version of Reflash.
	If you want to try the next version, take a look at		If you want to try the next version, take a look at <br>
	[Reflash_1.0.0]		[[Reflash_1.0.0]]

	This page has step-by-step instructions for using the image. Here is what you should do:		This page has step-by-step instructions for using the image. Here is what you should do:

Elias at 14:34, 23 March 2024

2024-03-23T14:34:46Z

← Older revision		Revision as of 14:34, 23 March 2024
Line 4:		Line 4:

	Reflash is a Linux image for downloading and installing [[Refactor]] images on [[Recore]]. You can also create an image from the contents of the eMMC.		Reflash is a Linux image for downloading and installing [[Refactor]] images on [[Recore]]. You can also create an image from the contents of the eMMC.

			This page is for Reflash v0.1.2 which is the latest stable version of Reflash.
			If you want to try the next version, take a look at
			[Reflash_1.0.0]

	This page has step-by-step instructions for using the image. Here is what you should do:		This page has step-by-step instructions for using the image. Here is what you should do:
	<ol>		<ol>

Elias at 23:28, 4 December 2023

2023-12-04T23:28:08Z

← Older revision		Revision as of 23:28, 4 December 2023
Line 7:		Line 7:
	<ol>		<ol>
	<li>		<li>
	Use [https://www.balena.io/etcher/ Balena Etcher] to download and flash the Reflash image. Here is the URL to the image: <pre>https://github.com/intelligent-agent/Reflash/releases/download/v0.1.1/Reflash-v0.1.1.img.xz</pre><div class="res-img">[[File:BalenaEthcer.png\|center]]</div>		Use [https://www.balena.io/etcher/ Balena Etcher] to download and flash the Reflash image. Here is the URL to the image: <pre>https://github.com/intelligent-agent/Reflash/releases/download/v0.1.2/Reflash-v0.1.2.img.xz</pre><div class="res-img">[[File:BalenaEthcer.png\|center]]</div>
	</li>		</li>
	<li>		<li>

Elias: /* Note */

2023-06-21T21:21:39Z

Note

← Older revision		Revision as of 21:21, 21 June 2023
Line 36:		Line 36:
	<div class="alert alert-warning">		<div class="alert alert-warning">
	===='''Note'''====		===='''Note'''====
	It is possible to log in to the Reflash image for manual operations. The SSH access is available using username '''root''' and password '''~~kamikaze~~'''		It is possible to log in to the Reflash image for manual operations. The SSH access is available using username '''root''' and password '''temppwd'''
	</div>		</div>

Elias at 21:15, 21 June 2023

2023-06-21T21:15:35Z

← Older revision		Revision as of 21:15, 21 June 2023
Line 13:		Line 13:
	</li>		</li>
	<li>		<li>
	Now you need to change boot medium from eMMC to USB on the Recore board. This can be done through SSH by logging in to the board and writing from the command line:<pre>set-boot-media usb</pre> And then<pre>reboot</pre> Alternatively, if the the previous version of Refactor was with OctoPrint, you can change boot media from the Refactor-tab in the OctoPrint user interface and then rebooting the board. From version v.3.1.0-RC1 there is also a button to set the boot media to USB in Mainsail. <div class="res-img">[[File:Set-boot-media-both.png]]</div>		Now you need to change boot medium from eMMC to USB on the Recore board. This can be done through SSH by logging in to the board and writing from the command line:<pre>sudo set-boot-media usb</pre> And then<pre>sudo reboot</pre> Alternatively, if the the previous version of Refactor was with OctoPrint, you can change boot media from the Refactor-tab in the OctoPrint user interface and then rebooting the board. From version v.3.1.0-RC1 there is also a button to set the boot media to USB in Mainsail. <div class="res-img">[[File:Set-boot-media-both.png]]</div>
	</li>		</li>

Elias at 20:00, 25 April 2023

2023-04-25T20:00:24Z

← Older revision		Revision as of 20:00, 25 April 2023
Line 5:		Line 5:
	Reflash is a Linux image for downloading and installing [[Refactor]] images on [[Recore]]. You can also create an image from the contents of the eMMC.		Reflash is a Linux image for downloading and installing [[Refactor]] images on [[Recore]]. You can also create an image from the contents of the eMMC.
	This page has step-by-step instructions for using the image. Here is what you should do:		This page has step-by-step instructions for using the image. Here is what you should do:
	# Use [https://www.balena.io/etcher/ Balena Etcher] to download and flash the Reflash image. Here is the URL to the image: <pre>https://github.com/intelligent-agent/Reflash/releases/download/v0.1.1/Reflash-v0.1.1.img.xz</pre><div class="res-img">[[File:BalenaEthcer.png\|center]]</div>		<ol>
	# After flashing the image to a USB drive with at least 4 GB of storage, eject the USB drive <b>properly</b> and insert it in a USB port on the Recore board.		<li>
	# Now you need to change boot medium from eMMC to USB on the Recore board. This can be done through SSH by logging in to the board and writing from the command line:<pre>set-boot-media usb</pre> And then<pre>reboot</pre> Alternatively, if the the previous version of Refactor was with OctoPrint, you can change boot media from the Refactor-tab in the OctoPrint user interface and then rebooting the board. From version v.3.1.0-RC1 there is also a button to set the boot media to USB in Mainsail. <div class="res-img">[[File:Set-boot-media-both.png]]</div>		Use [https://www.balena.io/etcher/ Balena Etcher] to download and flash the Reflash image. Here is the URL to the image: <pre>https://github.com/intelligent-agent/Reflash/releases/download/v0.1.1/Reflash-v0.1.1.img.xz</pre><div class="res-img">[[File:BalenaEthcer.png\|center]]</div>
			</li>
			<li>
			After flashing the image to a USB drive with at least 4 GB of storage, eject the USB drive <b>properly</b> and insert it in a USB port on the Recore board.
			</li>
			<li>
			Now you need to change boot medium from eMMC to USB on the Recore board. This can be done through SSH by logging in to the board and writing from the command line:<pre>set-boot-media usb</pre> And then<pre>reboot</pre> Alternatively, if the the previous version of Refactor was with OctoPrint, you can change boot media from the Refactor-tab in the OctoPrint user interface and then rebooting the board. From version v.3.1.0-RC1 there is also a button to set the boot media to USB in Mainsail. <div class="res-img">[[File:Set-boot-media-both.png]]</div>
			</li>

	<div class="alert alert-warning">		<div class="alert alert-warning">
	===='''Note'''====		===='''Note'''====
	Depending on the size and speed of the USB drive, it can take a while to boot the first time. The file system is automatically expanded and this can be time consuming.		Depending on the size and speed of the USB drive, it can take a while to boot the first time. The file system is automatically expanded and this can be time consuming. </div>
	</div>
	~~# Once the board has booted from USB, you should be able to access the web interface using the address http://recore.local <div class="res-img">[[File:Reflash.png\|center]]</div>~~
	# From the web interface, choose witch version of Refactor you want to download. There are two types of images, either with OctoPrint as the web interface or with Mainsail as the web interface. You should always choose the latest version of Refactor.
	~~# Once the image has been downloaded (to the USB drive) you can install/flash the image to the eMMC. This will take 5-10 minutes.~~
	~~# Once the image has been flashed on the eMMC drive, you can reboot the board, and it will boot using the Refactor image that you chose.~~

			<li>
			Once the board has booted from USB, you should be able to access the web interface using the address http://recore.local<div class="res-img">[[File:Reflash.png\|center]]</div>
			</li>
			<li>
			From the web interface, choose witch version of Refactor you want to download. There are two types of images, either with OctoPrint as the web interface or with Mainsail as the web interface. You should always choose the latest version of Refactor.
			</li>
			<li>
			Once the image has been downloaded (to the USB drive) you can install/flash the image to the eMMC. This will take 5-10 minutes.
			</li>
			<li>Once the image has been flashed on the eMMC drive, you can reboot the board, and it will boot using the Refactor image that you chose.
			</li>
			</ol>
	You can keep the Reflash USB drive in a safe place, or even keep it mounted in the printer. If you want to upgrade to a later version of Refactor, the same image can be used again.		You can keep the Reflash USB drive in a safe place, or even keep it mounted in the printer. If you want to upgrade to a later version of Refactor, the same image can be used again.

Elias at 19:38, 25 April 2023

2023-04-25T19:38:16Z

← Older revision		Revision as of 19:38, 25 April 2023
Line 8:		Line 8:
	# After flashing the image to a USB drive with at least 4 GB of storage, eject the USB drive <b>properly</b> and insert it in a USB port on the Recore board.		# After flashing the image to a USB drive with at least 4 GB of storage, eject the USB drive <b>properly</b> and insert it in a USB port on the Recore board.
	# Now you need to change boot medium from eMMC to USB on the Recore board. This can be done through SSH by logging in to the board and writing from the command line:<pre>set-boot-media usb</pre> And then<pre>reboot</pre> Alternatively, if the the previous version of Refactor was with OctoPrint, you can change boot media from the Refactor-tab in the OctoPrint user interface and then rebooting the board. From version v.3.1.0-RC1 there is also a button to set the boot media to USB in Mainsail. <div class="res-img">[[File:Set-boot-media-both.png]]</div>		# Now you need to change boot medium from eMMC to USB on the Recore board. This can be done through SSH by logging in to the board and writing from the command line:<pre>set-boot-media usb</pre> And then<pre>reboot</pre> Alternatively, if the the previous version of Refactor was with OctoPrint, you can change boot media from the Refactor-tab in the OctoPrint user interface and then rebooting the board. From version v.3.1.0-RC1 there is also a button to set the boot media to USB in Mainsail. <div class="res-img">[[File:Set-boot-media-both.png]]</div>

			<div class="alert alert-warning">
			===='''Note'''====
			Depending on the size and speed of the USB drive, it can take a while to boot the first time. The file system is automatically expanded and this can be time consuming.
			</div>
	# Once the board has booted from USB, you should be able to access the web interface using the address http://recore.local <div class="res-img">[[File:Reflash.png\|center]]</div>		# Once the board has booted from USB, you should be able to access the web interface using the address http://recore.local <div class="res-img">[[File:Reflash.png\|center]]</div>
	# From the web interface, choose witch version of Refactor you want to download. There are two types of images, either with OctoPrint as the web interface or with Mainsail as the web interface. You should always choose the latest version of Refactor.		# From the web interface, choose witch version of Refactor you want to download. There are two types of images, either with OctoPrint as the web interface or with Mainsail as the web interface. You should always choose the latest version of Refactor.