Recans A0: Difference between revisions

Latest revision as of 00:28, 25 February 2024

Recans A0 has two controllers, one is based on RP2040, the other on MCP2515.

The MCP2515 CAN controller

sudo mount -o remount,rw /boot
sudo armbian-add-overlay /boot/overlay-user/sun50i-a64-mcp251x.dts
sudo mount -o remount,ro /boot

After booting:

sudo gpioset 1 165=0
sudo modprobe -r mcp251x
sudo modprobe mcp251x
dmesg | grep mcp

sudo ip link set can0 type can bitrate 125000
sudo ip link set can0 txqueuelen 128
sudo ip link set up can0

Interrupt: STEP7 = PL11

sudo apt install net-tools can-utils

cansend can1 5A1#11.2233.44556677.88

ip -details link show can0

~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0

candump -tz -Ddex can0,#FFFFFFFF

To compile the RP2040 with klipper:

cd ~/klipper
cp test/configs/rp2040.config .config
make menuconfig
-- Communication interface = RP2040
-- RX = GPIO4
-- TX = GPIO5
make
sudo apt install libusb-1.0-0-dev
sudo FLASH_DEVICE="2e8a:0003" make flash

Hardware Errata

SPI_CLK and SPI_MOSI are interchanged and need to be fixed.
/RESET is floating.

Error messages

When sending: - write: No buffer space available

Got error -1 in can write: (105)No buffer space available

After that I get:

DROPCOUNT: dropped 109 CAN frames on 'can0' socket (total drops 576)

(302.908159) can0 RX - - 20000004 [8] 00 01 00 00 00 00 00 00 ERRORFRAME

       controller-problem{rx-overflow}

And the INT pin remains low. Needs a restart.

Debug

During init/reset:

TX: 0xC0 = RESET

TX: 0x03 0x0E 0x00 = READ CANSTAT
RX: 0x00 0x00 0x80 = Device is in Configuration mode

TX: 0x03 0x0F 0x00 = READ CANCTRL
RX: ? 

TX: 0x02 0x0F 0x20 = WRITE CANCTL = Sleep Mode

When trying to set interface up:

TX: 0x02 0x0F 0x80 = WRITE CANCTRL REQOP2 = Configuration Mode
RX: 0x00 0x00 0x00

TX: 0x03 0x0E 0x00 = READ CANSTAT
RX: 0x00 0x00 0x64 = OPMOD[2:0] = 0b011, ICOD[2:0] = 0b010

Device is in Listen-Only mode, Wake-up interrupt

It seems that the bring up sequence interferes with the initialization. Must make sure the mcp2515 probing is done after power is applied.

@@ Line 1: / Line 1: @@
 Recans A0 has two controllers, one is based on RP2040, the other on MCP2515.
-To bring up the RP2040 CAN controller:
-<pre>
-sudo ip link set can0 type can bitrate 1000000
-sudo ip link set up can0
-sudo ifconfig can0 txqueuelen 128
-</pre>
 The MCP2515 CAN controller<br>
@@ Line 19: / Line 11: @@
 After booting:
 <pre>
+sudo gpioset 1 165=0
+sudo modprobe -r mcp251x
+sudo modprobe mcp251x
 dmesg | grep mcp
 </pre>
 <pre>
-sudo ip link set can1 type can bitrate 1000000
+sudo ip link set can0 type can bitrate 125000
-sudo ip link set up can1
+sudo ip link set can0 txqueuelen 128
-sudo ifconfig can1 txqueuelen 128
+sudo ip link set up can0
 </pre>
@@ Line 46: / Line 41: @@
 </pre>
-===Errata===
+<pre>
+candump -tz -Ddex can0,#FFFFFFFF
+</pre>
+To compile the RP2040 with klipper:
+<pre>
+cd ~/klipper
+cp test/configs/rp2040.config .config
+make menuconfig
+-- Communication interface = RP2040
+-- RX = GPIO4
+-- TX = GPIO5
+make
+sudo apt install libusb-1.0-0-dev
+sudo FLASH_DEVICE="2e8a:0003" make flash
+</pre>
+===Hardware Errata===
 * SPI_CLK and SPI_MOSI are interchanged and need to be fixed.
 * /RESET is floating.
+===Error messages===
+When sending:
+- write: No buffer space available
+Got error -1 in can write: (105)No buffer space available
+After that I get:
+DROPCOUNT: dropped 109 CAN frames on 'can0' socket (total drops 576)
+(302.908159)  can0  RX - -  20000004   [8]  00 01 00 00 00 00 00 00   ERRORFRAME
+        controller-problem{rx-overflow}
+And the INT pin remains low. Needs a restart.
 ===Debug===
@@ Line 79: / Line 108: @@
 Device is in Listen-Only mode, Wake-up interrupt
+It seems that the bring up sequence interferes with the initialization. Must make sure the mcp2515 probing is done after power is applied.