Difference between revisions of "Rebuild v1.0.0"
| Line 2: | Line 2: | ||
Rebuild is a simplified build system for making images for Recore. It is based on Armbian's Build system, and adapted to the creating finished images for printing with Mainsail, Fluidd or OctoPrint as user interfaces. | Rebuild is a simplified build system for making images for Recore. It is based on Armbian's Build system, and adapted to the creating finished images for printing with Mainsail, Fluidd or OctoPrint as user interfaces. | ||
| − | The images are available | + | |
| − | + | Rebuild is a complete Linux image for Recore 3D printer controller boards. It comes with Klipper installed and the choice of either MainSail, Fluidd or OctoPrint. | |
| + | |||
| + | Rebuild is still in testing There is a release candidate available: v1.0.0-RC1 | ||
| + | |||
| + | =Installing an image= | ||
| + | For instructions on making a flasher image, have a look at [[Reflash]] | ||
| + | <div class="alert alert-warning"> | ||
| + | ===='''Note'''==== | ||
| + | In order to install Rebuild v1.0.0-RC1, you need to use Reflash v1.0.0-RC0 or newer. | ||
| + | </div> | ||
| + | |||
| + | =Latest images= | ||
| + | The latest images for Recore are available from github: https://github.com/intelligent-agent/Rebuild/releases, but you can also choose to install an image directly from Reflash. | ||
| + | |||
KlipperScreen is running on X, so a new config should allow rotating the screen. | KlipperScreen is running on X, so a new config should allow rotating the screen. | ||
Revision as of 12:09, 23 March 2024
Rebuild is a simplified build system for making images for Recore. It is based on Armbian's Build system, and adapted to the creating finished images for printing with Mainsail, Fluidd or OctoPrint as user interfaces.
Rebuild is a complete Linux image for Recore 3D printer controller boards. It comes with Klipper installed and the choice of either MainSail, Fluidd or OctoPrint.
Rebuild is still in testing There is a release candidate available: v1.0.0-RC1
Installing an image
For instructions on making a flasher image, have a look at Reflash
Note
In order to install Rebuild v1.0.0-RC1, you need to use Reflash v1.0.0-RC0 or newer.
Latest images
The latest images for Recore are available from github: https://github.com/intelligent-agent/Rebuild/releases, but you can also choose to install an image directly from Reflash.
KlipperScreen is running on X, so a new config should allow rotating the screen.
sudo nano /usr/share/X11/xorg.conf.d/90-monitor.conf
Add the following:
Section "Monitor"
Identifier "HDMI-1"
Option "Rotate" "left"
EndSection
After that, KlipperScreen can be restarted.
sudo systemctl restart KlipperScreen