Difference between revisions of "Voron 2.4"
From iagent
(Created page with "Using Recore A8 in a Voron 2.4") |
|||
| Line 1: | Line 1: | ||
Using Recore A8 in a Voron 2.4 | Using Recore A8 in a Voron 2.4 | ||
| + | |||
| + | Cabling from PSU to board: 16 AWG | ||
| + | Cabling from stepper motors to board: 26 AWG | ||
| + | |||
| + | Black wire for 24 V and 48 V: 1007-16-1-2000-001-1-TS | ||
| + | Red wire for 24 V and 48 V: 1007-16-1-2000-004-1-TS | ||
Revision as of 14:50, 6 September 2024
Using Recore A8 in a Voron 2.4
Cabling from PSU to board: 16 AWG Cabling from stepper motors to board: 26 AWG
Black wire for 24 V and 48 V: 1007-16-1-2000-001-1-TS Red wire for 24 V and 48 V: 1007-16-1-2000-004-1-TS