Rebuild v1.0.0: Difference between revisions

Revision as of 17:10, 29 December 2023

Rebuild is a simplified build system for making images for Recore. It is based on Armbian's Build system, and adapted to the creating finished images for printing with Mainsail, Fluidd or OctoPrint as user interfaces.

The images are available to download from the build server: https://github.com/intelligent-agent/Rebuild

KlipperScreen is running on X, so a new config should allow rotating the screen.

sudo nano /usr/share/X11/xorg.conf.d/90-monitor.conf

Add the following:

Section "Monitor"
    Identifier "HDMI-1"
    Option "Rotate" "left"
EndSection

After that, KlipperScreen can be restarted.

sudo systemctl restart KlipperScreen

Revision as of 10:49, 23 June 2023 view source Elias (talk \| contribs) Bureaucrats, Administrators 1,575 edits No edit summary ← Older edit		Revision as of 17:10, 29 December 2023 view source Elias (talk \| contribs) Bureaucrats, Administrators 1,575 edits No edit summary Newer edit →
Line 1:		Line 1:
			[[File:Rebuild header.png\|thumb\|center]]
	Rebuild is a simplified build system for making images for Recore. It is based on Armbian's Build system, and adapted to the creating finished images for printing with Mainsail, Fluidd or OctoPrint as user interfaces.		Rebuild is a simplified build system for making images for Recore. It is based on Armbian's Build system, and adapted to the creating finished images for printing with Mainsail, Fluidd or OctoPrint as user interfaces.