Difference between revisions of "Voron 2.4"
(→Wire lengths) |
(→Wire lengths) |
||
| Line 38: | Line 38: | ||
Z3: 35 cm<br> | Z3: 35 cm<br> | ||
| − | USB A to | + | USB A to A: 60 cm<br> |
== Tools == | == Tools == | ||
Revision as of 09:52, 27 October 2024
Using Recore A8 in a Voron 2.4
Contents
Power supplies
24 V PSU: LRS-200-24
48 V PSU: LRS-2002N-48
Peripherals
Control board: Recore A8
Extruder control board: Remote A1
Bed light: Relit A1
Screen: Renits A2
Camera: Logitech C270
Wires
Black wire for 24 V and 48 V: 1007-16-1-2000-001-1-TS
Red wire for 24 V and 48 V: 1007-16-1-2000-004-1-TS
4 conductor black multicore for steppers: Molex 1552200064
2 conductor black multicore fo4r fans: Tensility 30-00695
Wire gauges
Cabling from PSU to board: 16 AWG/1.31 mm² (10.0 A)
For steppers on the control board: Minumum 24 AWG/0.2 mm² (3.0A):
For steppers on Revolt: Minumum 22 AWG/0.33 mm² (2.0A): 1552200064
For cabling for fans: 26 AWG/0.13 mm² (1.0 A)
Connectors
Cable lugs: Wurth elektronik 55804025
USB connector for debug: 1131380000
Wire lengths
Steppers
X:
Y:
Z0: 16 cm
Z1: 47 cm
Z2: 70 cm
Z3: 35 cm
USB A to A: 60 cm
Tools
Cable cutter and stripper: Klein tools 11046
PSU crimping lugs: Klein tools VDV200-010 and VDV205-044
JST crimping tool: Engineer PA-09