Mainsail

On Replicape

2. ssh in replicape with user "debian" 3. start kiauh: "cd kiauh" and "kiauh.sh" 4. in kiauh: select "1: Install" then "2: Moonraker" (Moonraker ist API for the comunication between klipper and mainsail) 5. after installation "moonraker", install "3: Mainsail" 6. Leave kiah with "q", kiauh will disable octoprint 7. follow the docu at "https://docs.mainsail.xyz/setup/manual-setup/klipper" 8. edit /etc/systemd/system/klipper.service with "nano" ad add "-a /tmp/klippy_uds" to the end of the arg, 9. restart sevices "sudo service klipper restart" and "sudo service moonraker restart" 10. remove port forwarding from octoprint: "nft flush ruleset" and disable it "systemctl mask nftables.service" (thx, goeland86) 11. edit & create the config files like described in "https://docs.mainsail.xyz/setup/manual-setup" 12. if moonraaker cant connect to klipper, reinstall klipper: "cd" than "cd klipper" than "cd scripts" than "./install-beaglebone.sh" 13. restart sevices "sudo service klipper restart" and "sudo service moonraker restart" 14. check if you can load the web ui 15. thats it, Folks

On Recore

ssh root@recore.local
su debian
cd /home/debian/kiauh
./kiauh.sh

Install moonraker Install mainsail Disable octoprint