Voron 2.4

Using Recore A8 in a Voron 2.4

Power supplies

24 V PSU: LRS-200-24
48 V PSU: LRS-2002N-48

Peripherals

Control board: Recore A8
Extruder control board: Remote A1
Bed light: Relit A1
Screen: Renits A2
Camera: Logitech C270

Wires

Black wire for 24 V and 48 V: 1007-16-1-2000-001-1-TS
Red wire for 24 V and 48 V: 1007-16-1-2000-004-1-TS

Wire gauges

Cabling from PSU to board: 16 AWG
For steppers on the control board: Minumum 24 AWG/0.2 mm² (3.0A)
For steppers on Revolt: Minumum 22 AWG/0.33 mm² (2.0A)
For cabling for fans: 26 AWG/0.13 mm² (1.0 A)

Connectors

Cable spades: 35559
Cable lugs: Wurth elektronik 55804025
USB connector for debug: 1131380000