Voron 2.4

Using Recore A8 in a Voron 2.4

Power supplies

24 V PSU: LRS-200-24
48 V PSU: LRS-2002N-48

Peripherals

Control board: Recore A8
Extruder control board: Remote A1
Bed light: Relit A1
Screen: Renits A2
Camera: Logitech C270

Wires

Black wire for 24 V and 48 V: 1007-16-1-2000-001-1-TS
Red wire for 24 V and 48 V: 1007-16-1-2000-004-1-TS
4 conductor black multicore for steppers: Molex 1552200064 2 conductor black multicore fo4r fans: Tensility 30-00695

Wire gauges

Cabling from PSU to board: 16 AWG/1.31 mm² (10.0 A)
For steppers on the control board: Minumum 24 AWG/0.2 mm² (3.0A):
For steppers on Revolt: Minumum 22 AWG/0.33 mm² (2.0A): 1552200064
For cabling for fans: 26 AWG/0.13 mm² (1.0 A)

Connectors

Cable lugs: Wurth elektronik 55804025
USB connector for debug: 1131380000

Tools

Cable cutter and stripper: Klein tools 11046 PSU crimping lugs: Klein tools VDV200-010 and VDV205-044 JST crimping tool: Engineer PA-09