Voron 2.4

Using Recore A8 in a Voron 2.4

Power supplies

24 V PSU: LRS-200-24
48 V PSU: LRS-2002N-48

Peripherals

Control board: Recore A8
Extruder control board: Remote A1
Bed light: Relit A1
Screen: Renits A2
Camera: Logitech C270

Wires

Black wire for 24 V and 48 V: 1007-16-1-2000-001-1-TS
Red wire for 24 V and 48 V: 1007-16-1-2000-004-1-TS
4 conductor black multicore for steppers: Molex 1552200064
2 conductor black multicore fo4r fans: Tensility 30-00695

Wire gauges

Cabling from PSU to board: 16 AWG/1.31 mm² (10.0 A)
For steppers on the control board: Minumum 24 AWG/0.2 mm² (3.0A):
For steppers on Revolt: Minumum 22 AWG/0.33 mm² (2.0A): 1552200064
For cabling for fans: 26 AWG/0.13 mm² (1.0 A)

Connectors

Cable lugs: Wurth elektronik 55804025
USB connector for debug: 1131380000

Wire lengths

Function	Length	Gauge	Conductors	Diameter mm	Manufacturer	MPN
Stepper X		22	4	5.1		1552200064
Stepper Y		22	4	5.1		1552200064
Stepper Z0	16	22	4	5.1		1552200064
Stepper Z1	47	22	4	5.1		1552200064
Stepper Z2	70	22	4	5.1		1552200064
Stepper Z3	35	22	4	5.1		1552200064
Endstop X		26	2	3.81		30-00695
Endstop Y		26	2	3.81		30-00695
Endstop Z		26	2	3.81		30-00695
Inductive probe		26	3
Relit		26	3
PSU 24 V		16	4			1007-16-1-2000-001-1-TS
PSU 48 V		16	2			1007-16-1-2000-001-1-TS
Fan F0		26	2	3.81		30-00695
Fan F1		26	2	3.81		30-00695
Fan F2		26	2	3.81		30-00695
Fan F3		26	2	3.81		30-00695
Control SSR		26	2
Thermistor bed		26	2
220 V to PSU 24 V			3	2.8
220 V to PSU 48 V			3	2.8
220 V to SSR			3	2.8
220 V to bed			2	2.8
USB to connector			4
USB to Screen			4
USB to camera			4
USB to Resend			4
USB to Remote			4
RJ45 to connector			8
HDMI to Screen			19

Tools

Cable cutter and stripper: Klein tools 11046
PSU crimping lugs: Klein tools VDV200-010 and VDV205-044
JST crimping tool: Engineer PA-09