Rebuild v1.0.0

Rebuild is a simplified build system for making images for Recore. It is based on Armbians Build system, and adapted to the creating finished images for printing with Mainsail, Fluidd or OctoPrint as user interfaces.

KlipperScreen is running on X, so a new config should allow rotating the screen.

sudo nano /usr/share/X11/xorg.conf.d/90-monitor.conf

Add the following:

Section "Monitor"
    Identifier "HDMI-1"
    Option "Rotate" "left"
EndSection

After that, KlipperScreen can be restarted.

sudo systemctl restart KlipperScreen