Revolt A1

Revolt is a dual 48 V compatible stepper motor driver add-on board. It is based on TMC5160.

Klipper config

[tmc5160 stepper_x]
run_current: 0.8
hold_current: 0.5
sense_resistor: 0.05
cs_pin: ar100:PD0
spi_software_sclk_pin: ar100:PD2
spi_software_mosi_pin: ar100:PD1
spi_software_miso_pin: ar100:PD3
chain_position: 1
chain_length: 2

[tmc5160 stepper_y]
run_current: 0.8
hold_current: 0.5
sense_resistor: 0.05
cs_pin: ar100:PD0
chain_position: 2
chain_length: 2