Adding a Servo

From iagent
Revision as of 20:31, 20 October 2018 by Elias (talk | contribs) (Created page with "== So you want to use a servo with your Replicape...== This is a very easy process! '''Step 1:''' Connect your servo to the X2 (or Y2) connection on your Replicape <img src=...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

So you want to use a servo with your Replicape...

This is a very easy process!

Step 1: Connect your servo to the X2 (or Y2) connection on your Replicape <img src="http://wiki.thing-printer.com/index.php?title=File:Servo.png" />

Step 2: Paste this section into your 'local.cfg'

[Servos]
# For Rev B, servo is either P9_14 or P9_16.
# Not enabled for now, just kept here for reference.
# Angle init is the angle the servo is set to when redeem starts.
# pulse min and max is the pulse with for min and max position, as always in SI unit Seconds.
# So 0.001 is 1 ms.
# Angle min and max is what angles those pulses correspond to.
servo_0_enable = True
servo_0_channel = P9_14
servo_0_angle_init = 90
servo_0_angle_min = -90
servo_0_angle_max = 90
servo_0_pulse_min = 0.001
servo_0_pulse_max = 0.002

Step 3 : Save and restart Redeem...

Step 4: Try the following commands to see if your servo is working:

M280 P0 S90 F3000
M280 P0 S-90 F3000

Step 5: You will need to tweak the position of your servo by changing the 'S90' and 'S-90' to whatever works for you...