Getting started

From iagent
Revision as of 08:15, 26 July 2021 by Elias (talk | contribs)
Jump to: navigation, search

How do I get started?

  1. Wire up your 3D printer to the Replicape or Recore.
  2. Install Refactor on the BeagleBone Black or Recore.
- Recore comes with Refactor pre-installed. 
- For Replicape, Refactor needs to be installed. 
  1. Connect to the device Connecting.
  2. Adjust the Klipper_settings for your 3D printer.