Difference between revisions of "Main Page"

From iagent
Jump to: navigation, search
(Off site)
(Off site)
Line 25: Line 25:
 
* [[Toggle]] The software for Manga Screen
 
* [[Toggle]] The software for Manga Screen
 
====Off site====
 
====Off site====
* [[https://www.klipper3d.org/ Klipper]] The "firmware" for Replicape/Recore
+
* [https://www.klipper3d.org/ Klipper] The "firmware" for Replicape/Recore
 
* [https://octoprint.org/ OctoPrint ] The software for controlling the printer.  
 
* [https://octoprint.org/ OctoPrint ] The software for controlling the printer.  
 
* [https://github.com/Ultimaker/CuraEngine CuraEngine] The slicer installed on Umikaze
 
* [https://github.com/Ultimaker/CuraEngine CuraEngine] The slicer installed on Umikaze

Revision as of 20:05, 4 May 2021

Delta H.jpg

This is the documentation for Recore, Manga Screen 1 and 2, Refactor and Toggle hardware and software products developed by made by Intelligent Agent. All software is free and open source. Recore is open schematic hardware and can be conveniently purchased in the store.

HowTo

Guides

Software

  • Refactor Complete Linux distribution for 3D-printers
  • Toggle The software for Manga Screen

Off site

  • Klipper The "firmware" for Replicape/Recore
  • OctoPrint The software for controlling the printer.
  • CuraEngine The slicer installed on Umikaze

Hardware

Old hardware

Development

Contributing

Legacy Information