Difference between revisions of "Mainsail"

Latest revision as of 19:03, 29 September 2021

On Replicape

These are some instructions that have been floating around on the Discord, use at your own risk.

ssh in replicape with user "debian"
start kiauh: "cd kiauh" and "kiauh.sh"
in kiauh: select "1: Install" then "2: Moonraker" (Moonraker ist API for the comunication between klipper and mainsail)
after installation "moonraker", install "3: Mainsail"
Leave kiah with "q", kiauh will disable octoprint
follow the docu at "https://docs.mainsail.xyz/setup/manual-setup/klipper"
edit /etc/systemd/system/klipper.service with "nano" ad add "-a /tmp/klippy_uds" to the end of the arg,
restart sevices "sudo service klipper restart" and "sudo service moonraker restart"
remove port forwarding from octoprint: "nft flush ruleset" and disable it "systemctl mask nftables.service" (thx, goeland86)
edit & create the config files like described in "https://docs.mainsail.xyz/setup/manual-setup"
if moonraaker cant connect to klipper, reinstall klipper: "cd" than "cd klipper" than "cd scripts" than "./install-beaglebone.sh"
restart sevices "sudo service klipper restart" and "sudo service moonraker restart"
check if you can load the web ui
thats it, Folks

On Recore

ssh root@recore.local
su debian
cd /home/debian/kiauh
./kiauh.sh

Install moonraker Install mainsail Disable octoprint

@@ Line 2: / Line 2: @@
 ==On Replicape ==
 These are some instructions that have been floating around on the Discord, use at your own risk.
-. ssh in replicape with user "debian"
+# ssh in replicape with user "debian"
-. start kiauh: "cd kiauh" and  "kiauh.sh"
+# start kiauh: "cd kiauh" and  "kiauh.sh"
-. in kiauh: select "1: Install" then "2: Moonraker" (Moonraker ist API for the comunication between klipper and mainsail)
+# in kiauh: select "1: Install" then "2: Moonraker" (Moonraker ist API for the comunication between klipper and mainsail)
-. after installation "moonraker", install "3: Mainsail"
+# after installation "moonraker", install "3: Mainsail"
-. Leave kiah with "q", kiauh will disable octoprint
+# Leave kiah with "q", kiauh will disable octoprint
-. follow the docu at "https://docs.mainsail.xyz/setup/manual-setup/klipper"
+# follow the docu at "https://docs.mainsail.xyz/setup/manual-setup/klipper"
-. edit /etc/systemd/system/klipper.service with "nano" ad add "-a /tmp/klippy_uds" to the end of the arg,
+# edit /etc/systemd/system/klipper.service with "nano" ad add "-a /tmp/klippy_uds" to the end of the arg,
-. restart sevices "sudo service klipper restart" and "sudo service moonraker restart"
+# restart sevices "sudo service klipper restart" and "sudo service moonraker restart"
-. remove port forwarding from octoprint: "nft flush ruleset" and disable it "systemctl mask nftables.service" (thx, goeland86)
+# remove port forwarding from octoprint: "nft flush ruleset" and disable it "systemctl mask nftables.service" (thx, goeland86)
-. edit & create the config files like described in "https://docs.mainsail.xyz/setup/manual-setup"
+# edit & create the config files like described in "https://docs.mainsail.xyz/setup/manual-setup"
-. if moonraaker cant connect to klipper, reinstall klipper:  "cd" than "cd klipper" than "cd scripts" than "./install-beaglebone.sh"
+# if moonraaker cant connect to klipper, reinstall klipper:  "cd" than "cd klipper" than "cd scripts" than "./install-beaglebone.sh"
-. restart sevices "sudo service klipper restart" and "sudo service moonraker restart"
+# restart sevices "sudo service klipper restart" and "sudo service moonraker restart"
-. check if you can load the web ui
+# check if you can load the web ui
-. thats it, Folks
+# thats it, Folks
 ==On Recore==