Difference between revisions of "Recans A0"
From iagent
| Line 33: | Line 33: | ||
</pre> | </pre> | ||
| + | <pre> | ||
| + | ip -details link show can0 | ||
| + | </pre> | ||
===Errata=== | ===Errata=== | ||
* SPI_CLK and SPI_MOSI are interchanged and need to be fixed. | * SPI_CLK and SPI_MOSI are interchanged and need to be fixed. | ||
* /RESET is floating. | * /RESET is floating. | ||
Revision as of 15:01, 22 February 2024
Recans A0 has two controllers, one is based on RP2040, the other on MCP2515.
To bring up the RP2040 CAN controller:
sudo ip link set can0 type can bitrate 1000000 sudo ip link set up can0 sudo ifconfig can0 txqueuelen 128
The MCP2515 CAN controller
sudo mount -o remount,rw /boot sudo armbian-add-overlay /boot/overlay-user/sun50i-a64-mcp251x.dts sudo mount -o remount,ro /boot
sudo ip link set can1 type can bitrate 1000000 sudo ip link set up can1 sudo ifconfig can1 txqueuelen 128
Interrupt: STEP7 = PL11
sudo apt install net-tools can-utils
cansend can1 5A1#11.2233.44556677.88
ip -details link show can0
Errata
- SPI_CLK and SPI_MOSI are interchanged and need to be fixed.
- /RESET is floating.