Difference between revisions of "Relit A0"

From iagent
Jump to: navigation, search
(Compatibility with A8)
Line 33: Line 33:
 
The total current consumption of one Relit is 192 mA when all LEDs are fully on.
 
The total current consumption of one Relit is 192 mA when all LEDs are fully on.
  
== Compatibility with A8 ==
+
== Compatibility with Recore A8 ==
 
To use with Recore A8, remove the Pull-up resistor, R1.
 
To use with Recore A8, remove the Pull-up resistor, R1.

Revision as of 23:03, 14 January 2024

Renits A0 ISO white BG.jpg

Relit A0 is a led strip of 12 RGB LEDs (Like NeoPixels) that work well with Recore A7.

Wiring diagram

Connection diagam A0.png

Compiling Klipper with support for Neopixels

https://wiki.iagent.no/wiki/Recore_A7#Neopixels

Klipper config

[neopixel relit]
pin: PB3
chain_count: 12

Testing

set_led led=relit  RED=1 GREEN=1 BLUE=1 TRANSMIT=1

3D model

https://github.com/intelligent-agent/Recore/blob/master/3D-files/Relit_A0.step

Read more

https://github.com/julianschill/klipper-led_effect/blob/master/docs/LED_Effect.md

Known limitations

Running the light at full power with all LEDs on can cause too much power to be drawn from the 5 V step down converter on Recore. Depending on the current consumption of the USB and CPU, this might be too much. The total current consumption of one Relit is 192 mA when all LEDs are fully on.

Compatibility with Recore A8

To use with Recore A8, remove the Pull-up resistor, R1.