Remove A1

From iagent
Revision as of 22:02, 23 September 2022 by Elias (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Remove is an accellerometer for doing input shaping with Klipper.

Remove A0 iso.jpg

Pinout diagram

Remove pinout.png

Klipper configuration

# The Remove resonance tester mcu
[mcu rp2040]
serial: /dev/ttyACM0
baud: 1500000

[adxl345]
cs_pin: rp2040:gpio5
spi_bus: spi0a

[resonance_tester]
accel_chip: adxl345
probe_points:
    100, 100, 20  # an example

[static_digital_output remove_leds]
pins: rp2040:gpio17, rp2040:gpio18