Difference between revisions of "Voron 2.4"

From iagent
Jump to: navigation, search
(→‎Wires)
(→‎Tools)
 
(59 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
Using Recore A8 in a Voron 2.4
 
Using Recore A8 in a Voron 2.4
 +
 +
===Wire diagram===
 +
This shows a logical representation of the wiring of the board.
 +
<div class="res-img">
 +
[[File:Voron-wire-diagram.png]]
 +
</div>
 +
 +
===Layout===
 +
This shows the layout of the wiring of the board.
 +
<div class="res-img">
 +
[[File:Voron-2.4-layout-small.png]]
 +
</div>
 +
 +
 +
 +
=== 3D models ===
 +
The 3D models used to organize the cables are available here as step files and FreeCad source files.
 +
All the files are available from the Recore public repository: <br>
 +
[https://github.com/intelligent-agent/Recore/tree/master/3D-files/Voron-2.4/Clamps https://github.com/intelligent-agent/Recore/tree/master/3D-files/Voron-2.4/Clamps]
 +
 +
<div class="res-img">
 +
[[File:Clamps-1.png]]
 +
</div>
  
 
=== Power supplies ===
 
=== Power supplies ===
Line 7: Line 30:
 
=== Peripherals ===
 
=== Peripherals ===
  
−
Control board: Recore A8<br>
+
Control board: [[Recore A8]]<br>
−
Extruder control board: Remote A1<br>
+
Extruder control board: [[Retool A2]]<br>
−
Bed light: Relit A1<br>
+
Bed light: [[Relit A0]]<br>
−
Screen: Renits A2<br>
+
Screen: [[Renits A5]]<br>
 
Camera: Logitech C270<br>
 
Camera: Logitech C270<br>
 +
Debug port: MH USB to TTL<br>
 +
On-off button: LP0115CCKW015CB
  
 
=== Wires ===
 
=== Wires ===
 
Black wire for 24 V and 48 V: 1007-16-1-2000-001-1-TS<br>
 
Black wire for 24 V and 48 V: 1007-16-1-2000-001-1-TS<br>
 
Red wire for 24 V and 48 V: 1007-16-1-2000-004-1-TS<br>
 
Red wire for 24 V and 48 V: 1007-16-1-2000-004-1-TS<br>
−
Black multicore Molex: 1552200064
+
4 conductor black multicore for steppers: Molex 1552200064<br>
 +
2 conductor black multicore fo4r fans: Tensility 30-00695
 +
 
 +
 
  
 
==== Wire gauges ====
 
==== Wire gauges ====
Line 23: Line 51:
 
For steppers on Revolt: Minumum 22 AWG/0.33 mm² (2.0A): 1552200064<br>
 
For steppers on Revolt: Minumum 22 AWG/0.33 mm² (2.0A): 1552200064<br>
 
For cabling for fans: 26 AWG/0.13 mm² (1.0 A)<br>
 
For cabling for fans: 26 AWG/0.13 mm² (1.0 A)<br>
 +
For 220 V: 22 AWG<br>
  
 
==== Connectors====
 
==== Connectors====
−
Cable spades: 35559<br>
+
Cable lugs: Wurth elektronik 55804025<br>  
−
Cable lugs: Wurth elektronik 55804025<br>
 
 
USB connector for debug: 1131380000<br>
 
USB connector for debug: 1131380000<br>
 +
Quick connect for button: TE 60118-1<br>
 +
Ferrules for 220 V: Weidmüller 0542500000
 +
Ferrules for 24 and 48 V: Weidmüller 0372700000
 +
 +
==== Wire lengths ====
 +
{| class="wikitable sortable"
 +
! Function !! Length (cm) !! Gauge (AWG/mm²) !! Conductors !! Diameter (mm) !! Manufacturer !! MPN !! Notes
 +
|-
 +
| Stepper X ||  || 22 || 4 || 5.1 || Molex || 1552200064 ||
 +
|-
 +
| Stepper Y ||  || 22 || 4 || 5.1 || Molex || 1552200064 ||
 +
|-
 +
| Stepper Z (S3) || 9 || 22 || 4 || 5.1 || Molex || 1552200064 ||
 +
|-
 +
| Stepper Z1 (S0) || 56 || 22 || 4 || 5.1 || Molex || 1552200064 ||
 +
|-
 +
| Stepper Z2 (S1) || 63 || 22 || 4 || 5.1 || Molex || 1552200064 ||
 +
|-
 +
| Stepper Z3 (S2) || 35 || 22 || 4 || 5.1 || Molex || 1552200064 ||
 +
|-
 +
| Endstop X & Y ||  || 28 || 4 || 3.78 || Tensility || 30-03409 ||
 +
|-
 +
| Endstop Z ||  || 26 || 2 || 3.81 || Tensility || 30-00695 ||
 +
|-
 +
| Fan F0 ||  || 26 || 2 || 3.81 || Tensility || 30-00695 ||
 +
|-
 +
| Fan F1 ||  || 26 || 2 || 3.81 || Tensility || 30-00695 ||
 +
|-
 +
| Fan F2 ||  || 26 || 2 || 3.81 || Tensility || 30-00695 ||
 +
|-
 +
| Fan F3 ||  || 26 || 2 || 3.81 || Tensility || 30-00695 ||
 +
|-
 +
| Inductive probe ||  || 24 || 3 || 3.4 || Tensility || 30-00006 ||
 +
|-
 +
| Relit ||  || 24 || 3 || 3.4 || Tensility || 30-00006 ||
 +
|-
 +
| PSU 24 V ||  || 16 || 4x1 || 2.31 || CNC Tech || 1007-16-1-2000-001-1-TS ||
 +
|-
 +
| PSU 48 V || 8 || 16 || 2x1 || 2.31 || CNC Tech || 1007-16-1-2000-001-1-TS ||
 +
|-
 +
| Control SSR || 24 || 26 || 2x1 || 2.31 || CNC Tech || 1007-16-1-2000-001-1-TS ||
 +
|-
 +
| Thermistor bed ||  || 26 || 2 ||  ||  ||  || Included
 +
|-
 +
| 220 V to PSU 24 V || 20 || 18 || 3x1 || 2.8 || Qualtek || 311007-01 ||
 +
|-
 +
| 220 V to PSU 48 V || 30 || 18 || 3x1 || 2.8 || Qualtek || 311007-01 ||
 +
|-
 +
| 220 V to SSR  || 20 || 18 || 1 || 2.8 || Qualtek || 311007-01 ||
 +
|-
 +
| 220 V to bed ||  ||  || 2 ||  ||  ||  || Included
 +
|-
 +
| USB to connector || 100 ||  || 4 ||  || Same Sky || CBL-UA-UA-10BP ||
 +
|-
 +
| USB to Screen || 50 ||  || 4 ||  || Assmann || A-USB31C-20A-050A ||
 +
|-
 +
| USB to camera ||  ||  || 4 || 3 ||  ||  || Included
 +
|-
 +
| USB to Resend || 100 ||  || 24 || 5 || GlobTek, Inc. || A-USB32C1-32C1-150-B ||
 +
|-
 +
| USB to Remote || 100 ||  || 24 || 5 || GlobTek, Inc. || USBCM31EM1M0USBCMMMBKR ||
 +
|-
 +
| RJ45 to connector || 60.1 ||  || 8 ||  || Amphenol ICC || RJE1Y22610152401 ||
 +
|-
 +
| HDMI to Screen || 50 ||  || 19 || 6 || Phoenix Contact || 1332078 ||
 +
|}
 +
 +
===Connections===
 +
====XY steppers (2x)====
 +
JST XH <-> JST PH<br>
 +
[[File:Connectors Stepper XY.png]]
 +
 +
====Z steppers (4x)====
 +
JST PH <-> JST PH<br>
 +
[[File:Connectors Stepper Z.png]]
 +
 +
====XY Endstops====
 +
JST PH <-> JST XH<br>
 +
[[File:Connectors Endstops XY.png]]
 +
 +
<div class="alert alert-warning">
 +
===='''Note'''====
 +
If using the [[Retool A2]], this is not needed.
 +
</div>
 +
 +
====DBG Header====
 +
[[File:Connectors Button Debug.png]]
 +
 +
====Relit A1====
 +
[[File:Connectors Relit.png]]
 +
 +
====24 V and 48 V====
 +
[[File:Connectors 24V.png]]
 +
====220 V====
 +
[[File:Connectors 220V.png]]
 +
 +
== Tools ==
 +
Cable cutter and stripper: Klein tools 11046<br>
 +
Ratchet crimper frame: Klein tools VDV200-010<br>
 +
Ferrule crimper die Set: Klein tools VDV205-039<br>
 +
Lugs crimper dies set: Klein tools VDV205-044<br>
 +
JST crimping tool: Engineer PA-09<br>
 +
<div class="res-img">
 +
[[File:Tools small.jpg]]
 +
</div>

Latest revision as of 13:41, 17 March 2025

Using Recore A8 in a Voron 2.4

Wire diagram

This shows a logical representation of the wiring of the board.

Voron-wire-diagram.png

Layout

This shows the layout of the wiring of the board.

Voron-2.4-layout-small.png


3D models

The 3D models used to organize the cables are available here as step files and FreeCad source files. All the files are available from the Recore public repository:
https://github.com/intelligent-agent/Recore/tree/master/3D-files/Voron-2.4/Clamps

Clamps-1.png

Power supplies

24 V PSU: LRS-200-24
48 V PSU: LRS-2002N-48

Peripherals

Control board: Recore A8
Extruder control board: Retool A2
Bed light: Relit A0
Screen: Renits A5
Camera: Logitech C270
Debug port: MH USB to TTL
On-off button: LP0115CCKW015CB

Wires

Black wire for 24 V and 48 V: 1007-16-1-2000-001-1-TS
Red wire for 24 V and 48 V: 1007-16-1-2000-004-1-TS
4 conductor black multicore for steppers: Molex 1552200064
2 conductor black multicore fo4r fans: Tensility 30-00695


Wire gauges

Cabling from PSU to board: 16 AWG/1.31 mm² (10.0 A)
For steppers on the control board: Minumum 24 AWG/0.2 mm² (3.0A):
For steppers on Revolt: Minumum 22 AWG/0.33 mm² (2.0A): 1552200064
For cabling for fans: 26 AWG/0.13 mm² (1.0 A)
For 220 V: 22 AWG

Connectors

Cable lugs: Wurth elektronik 55804025
USB connector for debug: 1131380000
Quick connect for button: TE 60118-1
Ferrules for 220 V: Weidmüller 0542500000 Ferrules for 24 and 48 V: Weidmüller 0372700000

Wire lengths

Function Length (cm) Gauge (AWG/mm²) Conductors Diameter (mm) Manufacturer MPN Notes
Stepper X 22 4 5.1 Molex 1552200064
Stepper Y 22 4 5.1 Molex 1552200064
Stepper Z (S3) 9 22 4 5.1 Molex 1552200064
Stepper Z1 (S0) 56 22 4 5.1 Molex 1552200064
Stepper Z2 (S1) 63 22 4 5.1 Molex 1552200064
Stepper Z3 (S2) 35 22 4 5.1 Molex 1552200064
Endstop X & Y 28 4 3.78 Tensility 30-03409
Endstop Z 26 2 3.81 Tensility 30-00695
Fan F0 26 2 3.81 Tensility 30-00695
Fan F1 26 2 3.81 Tensility 30-00695
Fan F2 26 2 3.81 Tensility 30-00695
Fan F3 26 2 3.81 Tensility 30-00695
Inductive probe 24 3 3.4 Tensility 30-00006
Relit 24 3 3.4 Tensility 30-00006
PSU 24 V 16 4x1 2.31 CNC Tech 1007-16-1-2000-001-1-TS
PSU 48 V 8 16 2x1 2.31 CNC Tech 1007-16-1-2000-001-1-TS
Control SSR 24 26 2x1 2.31 CNC Tech 1007-16-1-2000-001-1-TS
Thermistor bed 26 2 Included
220 V to PSU 24 V 20 18 3x1 2.8 Qualtek 311007-01
220 V to PSU 48 V 30 18 3x1 2.8 Qualtek 311007-01
220 V to SSR 20 18 1 2.8 Qualtek 311007-01
220 V to bed 2 Included
USB to connector 100 4 Same Sky CBL-UA-UA-10BP
USB to Screen 50 4 Assmann A-USB31C-20A-050A
USB to camera 4 3 Included
USB to Resend 100 24 5 GlobTek, Inc. A-USB32C1-32C1-150-B
USB to Remote 100 24 5 GlobTek, Inc. USBCM31EM1M0USBCMMMBKR
RJ45 to connector 60.1 8 Amphenol ICC RJE1Y22610152401
HDMI to Screen 50 19 6 Phoenix Contact 1332078

Connections

XY steppers (2x)

JST XH <-> JST PH
Connectors Stepper XY.png

Z steppers (4x)

JST PH <-> JST PH
Connectors Stepper Z.png

XY Endstops

JST PH <-> JST XH
Connectors Endstops XY.png

Note

If using the Retool A2, this is not needed.

DBG Header

Connectors Button Debug.png

Relit A1

Connectors Relit.png

24 V and 48 V

Connectors 24V.png

220 V

Connectors 220V.png

Tools

Cable cutter and stripper: Klein tools 11046
Ratchet crimper frame: Klein tools VDV200-010
Ferrule crimper die Set: Klein tools VDV205-039
Lugs crimper dies set: Klein tools VDV205-044
JST crimping tool: Engineer PA-09

Tools small.jpg

Retrieved from "https://wiki.iagent.no/mediawiki/index.php?title=Voron_2.4&oldid=1601"